L&M Engines 4.6L All Out:
Bringing back the Iconic 4.6L block with a bit of a twist. We start off with an aluminum 4.6L block; we sleeve these to Coyote bore 3.631. We Pair this with a 3.750" stroke crankshaft, this brings the displacement to 5.0L+ 311 Cubic Inches! This unique combination has been proven to take quite a bit of abuse making some serious power!
The Build
| Block | Ford 4.6L Aluminum Block |
|---|---|
| Cylinders |
Ductile Iron Sleeves |
| Crankshaft | 3.750" Forged Crankshaft |
| Pistons | L&M Custom Pistons 3.631" Bore |
| Rods | Manley Pro I Beam Billet Rods 3.750" Stroke |
| Rings | Total Seal AP Steel Rings |
| Rod Bearings | King Engine XPN Series |
| Main Bearings | King Engine HP Series |
| Fasteners | ARP main studs and side bolts |
4.6L Aluminum Block Sleeved To Coyote Bore 3.631"
If you would like to reuse your old block, please call or email us to obtain an updated quote since pricing will differ when using customer supplied engine components.
New 4.6L 3.750" Stroker Crankshaft
L&M Engines Custom Series Pistons
The stock pistons are a weak spot in the modular engine design. Our custom pistons retain the beneficial features while significantly improving the overall design.
- Designed in house by L&M Engines and Manufactured by Diamond Pistons
- Ceramic coated piston domes
- .300” thick piston domes
- .300” down ring
- .130”+ skirts
- Teflon coated skirts
Manley Pro I Beam Billet Rods
Manley Pro I beam billet connecting rods.
King Engine Rod and Main Bearings
- King Rod Bearings XPN Series
- King Main Bearings HP Series
Full Race Engine Prep
Every engine gets the full race preparation whether it’s destined for the street or the track.
- Measure main bearing bores and alignment
- Install honing stress plates to measure plasma spray cylinders for size and fit
- Wash block for assembly
- Install pistons on rods with locks and check clearances
- Digitally balanced crankshaft
- Polish crankshaft and check journal dimensions
- Wash crankshaft for assembly
- Precision file end gaps of piston rings for required application
- Measure main & rod clearances, selective fit bearings for proper oil clearance, install bearings
- Assemble Ford Modular engine to short block configuration
- Review all dimensions & clearances
- Final QA and inspection
